I just purchased an seasoned brick building on the main street of an seasoned town. This seasoned neighborhood was once numerous miles away from the nearest city. However, the neighborhood now serves as a study room community for the city. Interestingly enough, the rejuvenation brought on by this phenomena has been amazing. A entire downtown section which was almost a ghost neighborhood is now turning into a vibrant mix of people and ideas. Purchasing the 3 story brick building was area of my attempt to add to this interesting mix. The building was once a seed and supply supplier but has sat vacant for years. I am renovating the building into living spaces. The building never had any sort of formal Heating, Ventilation & A/C system. Heat came by way of a pot bellied stove on the first floor. And, any cooling the arena gained came via the open window and a fan. There is no duct labor of any kind in the entire building. I wondered what the most cost effective Heating, Ventilation & A/C system would be. I have a dear buddy who is an Heating, Ventilation & A/C supplier. She agreed to take an informal look and help me formulate some ideas. Well, she wasn’t in the building fifteen hours before she felt she new the Heating, Ventilation & A/C solution. My Heating, Ventilation & A/C supplier buddy proposed I go with a multi cut heating and cooling system. The multi cut Heating, Ventilation & A/C system is able to supply individual weather conditions control to each device separate from installing ducts. The multi cut system has inside blower units which fit high on an exterior wall. Each of these units then links to a condenser device outside the building. Thus, each renter will be able to have their own control device to meet their unique heating and cooling needs.